About this item

• Touchless Bathroom Faucet: When sensor be activated, the faucet automatically supplies water as soon as hands are within sensing range, and stops when you move away your hand. No longer to touch the faucet after washing hands. It's hands free, hygiene, convenient and easy operation.
• Water saving automatic faucet: Automatic shutting off ensures the faucet reduces overall water usage without sacrificing water pressure.
• Energy saving sensor: Faucet is powered by 4pcs AA alkaline batteries (NOT included) , battery can last about 2 years for family use.
• Easy-Installation basin faucet: Single hole mounted with all the necessary US standard accessories; Suitable deck thickness 20-30mm; Suitable hole diameter 32-38mm; Faucet comes with water mixer valve to adjust water temperature.
• Durable brass mixer: Oil Rubbed Finishing (not pure black) . Solid brass construction for reliability and long lasting performance. Faucet comes with one mixer valve to adjust water temperature. Welcome to contact our service team for any questions, we will help you until satisfaction.

Product Description

Automatic Faucet Features

• Water saving: Water out automatically when you put your hands under the induction zone, water stops when put your hands back.
• Hygienic: Hands free, avoid infection-cross by touching faucet.
• Hands free: Micro-computer control.
• Soft touch: The aerator with technology of air in water, make water been soft touched and no splash.
• Energy saving: Battery power, 4AA alkaline batteries, can be used for around 2 years.

Automatic Faucet Parameters

• Power Supply: DC 6V, 4AA alkaline Battery (not included) , can last for 2 years for family use
• Sensoring Distance (factory setting): 15cm
• Deck Hole Diameter: 32-38mm
• Deck Thickness: 20-30mm
• Deck Plate Length: 6.3inch
• Flow Rate: 8L/Min
• Cartridge Lifecycle: 500,000 Times
• Water Pressure: 0.05-0.7Mpa
• Switching Time: Less than 0.7s
• Low Battery Indicator: Red Led Flash

Package Content

Our faucet is packed with thick foam and color box. You will receive it in good condition with all faucets accessories included:

• 1x Faucet body with mounting stem and nut (ORB finishing)
• 1x Control box
• 1x Water mixer valve, brass with check valve
• 2x 1/2-9/16 water supply pipe, with red and blue mark (red one for hot water, blue one for cold water)
• 1x 1/2-1/2 water pipe (for mixing water)
• 1x Set fixing screws (for control box)
• 1x instruction paper

Infrared Sensor Faucet

Factory setting sensing distance is 15cm. Put your hand within this distance, water will flow automatically. Remove your hand, water will stop.

This motion sensor faucet will make your washing cleaning and convenient.

Waterfall Sensor Faucet

It's a square design faucet with wide waterfall spout, about 6cm. The streamline design makes this faucet more beautiful and generous and let you enjoy the washing.

ORB Bathroom Faucet

This faucet is polished with ORB finishing. At the edge of it, it's rubbed color. This is not a pure black faucet.

You have to purchase carefully.

How to install the faucet?

Faucet Installation Steps:

Before Installation, you may need these tools: electrodrill,screwdriver,hammer,spanner,pencil.

Install the faucet according to the following steps:

• Step 1: Mounting the faucet on the deck and fasten the nuts on under the deck.
• Step 2: Put 4 AA alkaline battery in the battery case (batteries are not included in the package).
• Step 3: Fixing the control box on the wall.
• Step 4: Connect water mixing vale to the control box (mixer valve outlet to control box inlet).
• Step 5: Connect the water hoses (cold water hose marked blue, hot water hose marked red, mixing water hose without color).
• Step 6: Connect the sensor signal wire

Product information